Friday December 14, 2012 at 9:26am
If you're interested in
efficiency with SOLIDWORKS, check out the new Dell Precision M6700!!
Running a performance test in Flow Simulation compared against a Dell Precision M6500, the M6700 gives around
double the speed!
The tests were carried out on a series of problems from the Flow Sim training course. The table below shows the timed results. The collum on the far right shows the perfomormance improvement...
![](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
The detailed spec of each machine....
![](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Craig Hudson
Appications Engineer